How much does spray foam insulation cost in Texas?
Installed spray foam typically runs $1.50–$5.00 per square foot depending on foam type and
thickness. A typical home project lands around $1,500–$5,000+, and metal buildings and
barndominiums — where spray foam really earns its keep in Texas heat — scale with the size of the shell.
Estimate your project below in about 30 seconds.
$1.50–$3.50/sq ft
Open-cell foam, installed
$3.00–$5.00/sq ft
Closed-cell foam, installed
$1,500–$5,000+
Typical residential project total
R-3.7 vs R-6.5/in
R-value per inch: open-cell vs closed-cell
Free spray foam cost estimator
For a building shell, that's walls + ceiling. A 40×60 shop with 12-ft walls is roughly 4,800 sq ft of surface.
Closed-cell at 2″ ≈ R-13; open-cell needs roughly double the depth for the same R-value.
Your estimated range
Educational planning figures based on published national price guides — not a quote. Foam is priced by the board foot (1 sq ft × 1 inch thick), so thickness matters as much as area. See sources in the footer.
Open-cell vs. closed-cell: which do you need?
Open-cell
Closed-cell
Installed cost
$1.50–$3.50 / sq ft
$3.00–$5.00 / sq ft
R-value per inch
≈ R-3.5–3.7
≈ R-6–7
Moisture
Lets vapor pass; not a moisture barrier
Air + vapor barrier; resists condensation on metal
Best for
Interior walls, attics in moderate spots, sound control
Metal buildings, barndos, crawl spaces, roof decks
Bonus
Expands to fill cavities; cheaper per inch
Adds rigidity/strength to the structure
For Texas metal buildings, closed-cell is the usual recommendation: it stops the condensation "indoor rain"
that bare metal sweats out on humid mornings, and 2 inches does the work of a much thicker open-cell job.
What affects the price?
Foam type. Closed-cell uses more material per inch and costs roughly double open-cell per board foot.
Thickness. Price is per board foot — going from 2″ to 3″ adds about 50% to the foam bill.
Surface area. Measure the actual surface (walls + ceiling), not the floor. Tall walls add up fast.
Access and prep. Retrofit work, masking off finished spaces, and removing old insulation add labor. New construction and empty shells are cheapest per square foot.
Job size. Contractors have minimum charges (commonly around $1,200–$1,500, estimate) because the rig and crew roll regardless — tiny jobs cost more per square foot.
Location and season. Rural West Texas jobs may carry travel time; summer demand in Texas pushes schedules and prices up.
Watch out: a suspiciously cheap quote usually means thin application. Ask every bidder to state the foam type, the exact thickness, and the total board feet in writing — then compare board feet, not just totals.
Get real quotes from Texas spray foam pros
Send your project details once and get matched with spray foam contractors serving your area — including metal building and barndominium specialists. No obligation.